<aside> 💡 This document applies to the following products :
TEMP V4 IP68 Sigfox RC1 ambient probe and remote probe TEMP V4 IP68 Sigfox RC1 TEMP two external probes
Part number: ARF8181BCA ARF8181BCB
Firmware version: RTU version: V02.00.01 APP version: V02.01.00
</aside>
| Document Information | |
|---|---|
| Title | TEMP IP68 Sigfox RC1 - User Guide |
| Document type | User Guide |
| Version | 3.1.1 |
EU declaration of conformity( TEMP Sigfox ARF8181xx).pdf
IMPORTANT NOTE: The TEMP V4 IP68 Sigfox RC1 can be started with a magnet or switching the product in PRODUCTION mode with the IoT Configurator.
Description : • The TEMP IP68 Sigfox RC1 is a ready-to-use radio device enabling temperatures to be measured and transmitted by wireless communication network. • This product exists in 2 versions: one including an ambient probe and a remote probe and a second one with two remote probes. • These two products answer the users need to monitor the temperature (ambient or contact) of a storage room, cold room or all rooms needing a product able to withstand more or less harsh environment. • The use of the Sigfox RC1 protocol allows the user to integrate the TEMP IP68 Sigfox RC1 into any network that is already deployed. • The product emits the data from the sensors either periodically or in an event-based way based on top and/or bottom thresholds. • The configuration of the transmitter is accessible by the user via a micro-USB port or via the network, allowing in particular a choice of modes of transmission, periodicity or triggering thresholds. • The TEMP IP68 Sigfox RC1 is powered by a replaceable internal battery and/or an external supply. • The TEMP IP68 Sigfox RC1 is compatible with the KARE+ service.
Composition of the package The product is supplied in a cardboard box containing the following items: top casing, electronic card, casing base plate, 2 screws for the plate, cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs, Removable LiSOCl2 FANSO (battery-pack ER18505H+W36+51021)