PULSE_NB-IoT_UG_V1.0.0_FR_GB (1).pdf
<aside> 💡 This User Guide applies to the following product:
PULSE NB IoT REfrence: ARF8235AA
Firmware version:
RTU version: V02.01.00
</aside>
| INFORMATIONS DOCUMENT | |
|---|---|
| Title | PULSE NB IOT - User Guide |
| Type | Implementation |
| Version | 1.0.0 |
EU declaration of conformity( PULSE NB-IOT ARF8335A).pdf
IMPORTANT NOTE: the NB-IoT PULSE can be started using a magnet or changing is running mode in the IoT Configurator.
Description • NB-IoT PULSE is a ready to use radio transmitter that can be used to transform any type of meter into a wireless meter (smart meter). • This product meets the needs of users who require to remotely monitor the consumption of different fluids (water, gas, electricity, heat ...) or any other phenomenon with an impulse interface (rain gauge, odometer ...). • The use of the NB-IoT protocol allows the user to integrate the NB-IoT PULSE into any network that is already deployed. • Two 3 wires-meters or one 5 wires-meters may be controlled by a single NB-IoT PULSE transmitter thus permitting a significant reduction in implementation and deployment costs. • The product emits the data from the meters periodically with or without history. It allows also the detection of tamper, and leakage, and the flow calculation with transmission possibilities on exceeding high or low thresholds. • The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the NB-IoT network, allowing in particular a choice of modes of transmission, periodicity or triggering thresholds. • The NB-IoT PULSE is powered by replaceable double-battery pack.