PULSE_IP68_V4_sigfox_RC1_UG_V4.0.0_FR_GB (1).pdf
<aside> 💡 This User Guide applies to the following product:
PULSE IP68 V4 - Sigfox RC1 Refrence: ARF8230CBA Firmware version:
RTU version: V01.01.01 APP version: V02.01.00
</aside>
| INFORMATIONS DOCUMENT | |
|---|---|
| Title | Sigfox RC1 PULSE IP68 - User Guide |
| Type | Implementation |
| Version | 4.0.0 |
EU declaration of conformity( PULSE Sigfox ARF8230xx).pdf
IMPORTANT NOTE: the SIGFOX PULSE can only be started or restarted using a magnet.
Description • Sigfox RC1 PULSE IP68 is a ready to use radio transmitter that can be used to transform any type of meter into a wireless meter (smart meter). • This product meets the needs of users who require to remotely monitor the consumption of different fluids (water, gas, electricity, heat ...) or any other phenomenon with an impulse interface (rain gauge, odometer...). • The use of the sigfox protocol allows the user to integrate the sigfox RC1 PULSE IP68 into any network that is already deployed. • Two meters 3 wires or one meters 5 wires may be controlled by a single SIGFOX PULSE transmitter thus permitting a significant reduction in implementation and deployment costs. • The product emits the data from the meters periodically with or without history. It allows also the detection of tamper, and leakage, and the flow calculation with transmission possibilities on exceeding high or low thresholds. • The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the sigfox RC1 network, allowing in particular a choice of modes of transmission, periodicity or triggering thresholds. • The sigfox RC1 PULSE IP68 is powered by a replaceable internal battery. • The sigfox RC1 PULSE IP68 is fully compatible with the KARE+ service.