MODBUS_V2_LoRaWAN_AS923_V1.0.0.pdf

PRODUCTS AND REGULATORY INFORMATION

<aside> 💡 This document applies to the following products :

LoRaWAN MODBUS MASTER Reference: ARF8240JA Firmware Version:

RTU: V1.71 APP: V2.0.0

</aside>

Document Information
Title LoRaWAN AS923 MODBUS MASTER - User Guide
Document Type User Guide
Version 1.0.0

DOCUMENTATION GUIDE

PREAMBLE

DISCLAIMER

TECHNICAL SUPPORT

RECOMMENDATIONS

INTRODUCTION

COMPLIANCE TO RCM AUS NZ (produits de gamme LORA AU915 & AS923).pdf

TABLE OF CONTENTS

1. PRODUCT PRESENTATION

Description: • The Adeunis LoRaWAN MODBUS MASTER is a ready-to-use radio transmitter with a MODBUS interface. • This product meets the needs of users to communicate with one or several MODBUS slaves and transmit their information via a LoRaWAN network. • The product use the Remote Terminal Unit (RTU) Modbus protocol to communicate with the slaves. • The frame of the product can contain 24 registers (of 2 bytes) maximum per periodic frame. These registers can be distributed between the monitored slaves (20 slaves maximum) knowing that for each slave 15 registers can be configured per frame. • The product transmits the data from the slaves periodically through one or several frames (up to 6) with the same or different periods of transmission. • The product transmits the data from slave either periodically or in an event-related way based on high or low thresholds. • The product is able to read or write in the registers of a slave through the network. • The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the LoRaWAN network, allowing in particular a choice of modes of transmission, periodicity or triggering thresholds. • The LoRaWAN MODBUS MASTER is powered by an external power supply (not included). • The product is able to provide and control the power supply for a slave.

IMPORTANT NOTE: The LoRaWAN MODBUS MASTER is delivered by default with OTAA configuration, allowing the user to declare his/her product to a LoRaWAN operator.