<aside> đź’ˇ Product references of this package
| LoRaWAN EU863-870 | ARF8170BCA-B01 |
|---|---|
| LoRaWAN US902-928 | ARF8170BRA-B01 |
| LoRaWAN AU915-928 | ARF8170IRA-B01 |
| LoRaWAN AS923 | ARF8170JRA-B01 |
| Sigfox RC1 | ARF8171BA-B01 |
|---|---|
| Sigfox RC2 | ARF8170DRA-B01 |
| Sigfox RC4 | ARF8170KRA-B01 |
| </aside> |
The Contact-sensor is a ready-to-use product enabling to detect “door opening”. It is an assembly between a DRY CONTACTS transceiver and a proximity switch. Default settings have been established to simplify product installation by the user.
To insure the best operation of the package it is important to correctly position the different units.
The two parts of the proximity switch must be positioned to be completely aligned in closed position. WARNING : The detection is done when the proximity switch is at maximum 15 mm from its magnet.
The proximity switch could be used outside (-10/+85°C). To position the sensor, use screws supplied within the package respecting the dimensions given on the diagram hereunder.
