QuickStartGuide_Package-IOT_BINDER-CONNECTOR.pdf
<aside> 💡 Product references of this package • LoRaWAN : ARF8230FA-B01 • Sigfox : ARF8230GA-B01
</aside>
The BINDER CONNECTOR is a ready-use product enabling to measure pulses on gas meters in ATEX zone. The package is composed by an PULSE ATEX transceiver and a Binder 6-pin female connector. Default settings have been established to simplify product installation by the user.
Connect the binder connector to your gas meter
There are two key rules to optimize radio ranges. • The first one consists of positioning your product as high as possible. • The second one consists of limiting the number of obstacles in order to avoid excessive attenuation of the radio wave.
Position: Insofar as possible, install the transmitter at a minimum height of 1.50 m and do not attach it to the wall.
Obstacles: Ideally, the product must be 20 cm away from any obstacle and, if possible, near an opening (the closer the obstacle is, the more the emitted power will be absorbed). All the materials encountered by a radio wave will attenuate it. Bear in mind that metal (metal cabinets, beams, etc.) and concrete (reinforced concrete, partitions, walls, etc.) are the most critical materials for the propagation of radio waves.