Installation-Guide.pdf

DOCUMENTATION GUIDE

PREAMBLE

TECHNICAL SUPPORT

TABLE OF CONTENTS

1. CONFIGURATION OF THE PRODUCT WITH THE IOT CONFIGURATOR APP

ONLY FOR LORAWAN and SIGFOX SENSORS

The device configuration using the micro-USB port can now be done in two ways: using the IoT Configurator (application on the user-friendly interface) or by transmitting AT commands

1.1. IoT Configurator

Untitled

IoT Configurator is an Adeunis application developed to facilitate the configuration of devices through a user-friendly interface The IoT Configurator can be used directly on a mobile or tablet in Android or via a Windows PC.

Compatible with Windows 10 only and Android 5.0.0 Minimum Connect via the micro-USB interface (see section 5.2) present on the device the PC or the mobile.

The application automatically recognizes the device, downloads these configuration parameters and makes it possible to configure the device quickly and intuitively using the forms (drop-down menus, checkboxes, text fields, etc.). The application also lets you export an application configuration in order to duplicate it on other devices in a few clicks.

The IoT Configurator is continuously enriched with new features.

For mobile or tablet: Download application for free on Google Play https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp

For computer: directly on the Adeunis website https://www.adeunis.com/download/

1.2. Advanced Mode

1.2.1 Connecting the device to a computer

Connect the device to a USB input of a computer. The device has a Type B micro USB connector (see section 5.2). When connecting, the device must be recognized by the computer as a Virtual Com Port (VCP) device.

Using Windows: Verification that the device has been recognised to be functioning properly can be obtained by viewing the device manager. You should see the USB series device with a corresponding COM port number appear during connection.